ASA GLOBAL TICARET
       
       
 
      Home        Contact   
  ALUMINIUM WIRE RODES (1120/1370/6101/6201/Al-59/AL-ZR)  
 
picture_logo (9K) ALUMINIUM WIRE RODE 1120  
 
Material Continuous Casting AL 1120 Alloy Grade Aluminium Wire Rod
Chemical Composition of Alloying Elements,% According to EN 573-3 Other Impurities
Si Fe Cu Mn Mg Cr Zn Each Total
0.10 0.12 0.05 0.01 0.33 - 0.05 0.03 0.10
0.22 0.25 0.14
Mechanical and Electrical Characteristic
Alloy
Denomination
Mechanical Characteristics Electrical Characteristics
Tensile Strength
MPa
 
Elongation %
Resistivity nΩm
max.
Conductivity % IACS
min.
AL1120 140-170 ≥10 29.22 ≥59
 
picture_logo (9K) ALUMINIUM WIRE RODE 1370  
 
Material Continuous Casting EC Grade Aluminium Wire Rod
Guaranteed Chemical Composition EN AW 1370 (EAL 99.7)
 
Al %
 
Impurities, % MAX.
Other
Impurities %
  Fe Si Cu Zn Ti V Mn Cr Mg B Each Total
Min. 99.7 0.20 0.10 0.02 0.04 0.006 0.003 0.01 0.01 0.02 0.005 0.005 0.01
Dimensions,linear mass:The primary aluminium wire will be delivered in the following diameter and unit weight range
Nominal Diameter
mm
Deviation Range
mm
Linear Mass
Kg/m
9.5 ±0.5 0.191
12 ±0.5 0.305
15 ±0.5 0.477

  • The linear mass is calculated for the density of 2,7 kg/dm³
  • The cross-section of the wire rod is similar to a circle section,with three flattened sides.Wire ovality
      (the difference between the large and small  dimensions  of a section) will not exceed the value of
      the deviation range in table no 2

MECHANICAL & ELECTRICAL CHARACTERISTICS
 
CODE
Metallurgical
delivery state
 
Mechanical Characteristics
Electric characteristics
temperature 20°C
Rm
Mpa
Usual
Elongation
A100
%
 
Resistivity
µ cm
max.
 
Conductivity
% IACS
min.
Min. Max.
EN AW 1370
(EAL 99.7)
H16 120 140 10 2.801 61.55
H14 115 130 14 2.801 61.55
H13 105 120 16 2.801 61.55
H12 95 110 20 2.801 61.55
H11 80 95 25 2.801 61.55
 
picture_logo (9K) ALUMINIUM WIRE RODE 6101  
 
Material Continuous Casting 6101 Almelec Grade Aluminium Wire Rod
Guaranteed Chemical Composition EN 1715
Chemical Composition of Alloying Elements,% According to EN 573-3 Other Impurities
Si Fe Cu Mn Mg Zn B Each Total
0.30 0.10 0.05 0.05 0.35 0.01 0.003 0.03 0.1
0.60 0.30     0.60        
Dimensions,linear mass:6101 Alloy Aluminium Wire will be delivered in the following diameter and unit weight range
Nominal Diameter
mm
Deviation Range
mm
Linear Mass
Kg/m
9.5 ±0.5 0.191
  • The linear mass is calculated for the density of 2.7 kg/dm³
  • The cross-section of the wire rod is similar to a circle section,with three flattened sides.Wire ovality
      (the difference between the large and small dimensions of a  section)  will not exceed the value of
      the deviation range in table no 2.
Alloy
Denomination
Metallurgical
delivery state
Mechanical Characteristics Electric Characteristics Temperature 20°C
Tensile
Strength
Mpa
Min.
Usual
Elongation
A100
%
Resistivity
µ cm
max.
Conductivity
%IACS
min.
6101 T4 AlMgSi 150 20 3.45 51.29
 
picture_logo (9K) ALUMINIUM WIRE RODE 6201  
 
Material Continuous Casting 6201 Alloy Grade Aluminium Wire Rod
Guaranteed Chemical Composition EN 1715
Chemical Composition of Alloying Elements,% According to EN 573-3 Other Impurities
Si Fe Cu Mn Mg Cr Zn Each Total
0.50 0.5 0.01 0.03 0.60 0.03 0.01 0.03 0.1
0.90       0.90        
Dimensions,linear mass:6201 Alloy Aluminium Wire will be delivered in the following diameter and unit weight range
Nominal Diameter
mm
Deviation Range
mm
Linear Mass
Kg/m
9.5 ±0.5 0.191
  • The linear mass is calculated for the density of 2.7 kg/dm³
  • The cross-section of the wire rod is similar to a circle section,with three flattened sides.Wire ovality
      (the difference between the large and  small dimensions of a section) will  not exceed the value of
      the deviation range in table no 2.
Alloy
Denomination
Metallurgical
delivery state
Mechanical Characteristics Electric Characteristics Temperature 20°C
Tensile
Strength
Mpa
Min.
Usual
Elongation
A100
%
Resistivity
µ cm
max.
Conductivity
%IACS
min.
6201 AlMg0.7Si 160 21 3.55 49.74
 
picture_logo (9K) ALUMINIUM WIRE RODE AL-59  
 
Material Continuous Casting AL59 Alloy Grade Aluminium Wire Rod
Chemical Composition of Alloying Elements,% According to EN 573-3 Other Impurities
Si Fe Cu Mn Mg Cr Zn Each Total
0.35 0.06 0.005 0.01 0.33 - 0.05 0.03 0.10
0.45 0.18 0.015 0.43
Mechanical and Electrical Characteristic
Alloy
Denomination
Mechanical Characteristics Electrical Characteristics
Tensile Strength
MPa
Elongation % Resistivity nΩm
max.
Conductivity % IACS
min.
AL59 140-165 ≥10 32.53 ≥53
 
picture_logo (9K) ALUMINIUM WIRE RODE AL-ZR  
 
Material Continuous Casting Al-Zr Alloy for Thermal Resistant Aluminium Alloy According to IEC 62004
Type Designation Tensile Strength
N/mm2
Elongation
%/200mm
Resistivity
Ohm X m
Conductivity
% IACS
AT1 TAL Min 118 4 28,735 60%
AT2 KTAL Min 186 5 31,347 55%
AT3 ZTAL Min 118 4 28,735 60%
AT4 XTAL Min 118 4 29,726 58%
 
 
Origin Turkey
Payment Cash and By LC,it depends on the quantity.

THE BEST SERVICE